€ 1,32 / 100ml Please note, this product cannot be shipped into Switzerland and Norway.
Please contact our partner in Switzerland and Norway.
A. Shelf life:
Usage is possible for 24 months after buying (After opening too).
B. Drying of color negative films:
Possible, if water is used for final rinse.
Not possible, if C-41 stabilization bath is used.
C. Drying of black&white films:
Possible without any limitations. Use RAPIDRY directly after the rinse.
D. Usage of wetting agent:
Please don’t use an additional wetting agent.
User guide: - Pour the rinse water out of the developing tank.
- Pour RAPIDRY into the developing tank, then close the tank.
- Agitation: Invert the tank 3-4 x.
- Pour the RAPIDRY solution back into the original RAPIDRY bottle.
- Take the reels out of the tank immediately.
- Affix the film clip to the film end.
- Hang up the film and affix the film clip with counterweight at the other end of the film.
- Hang up the film at a dry, dust free place.
- If you want to use a film dryer / film drying cabinet please turn the heating off and use cold air.
- The film drying process takes about 5 minutes, depending on humidity and temperature.
- Afterwards the films are dry enough for further work like enlarging or scanning. Furthermore they are also antistatic and the emulsion is hardened.
- RAPIDRY is usable as long as drying times are not significantly extended.
RAPIDRY is usable for RC/PE papers as well.
|
